Visit Lysaght Professionals

Yes. An easy to install post conversion kit is available. With this simple post extension you can provide an exciting new look for your existing LYSAGHT NEETASCREEN® fence. Please see page 24 in the download: LYSAGHT® Non-Cyclonic Fencing Installation Guide (2.34 MB).

Yes. An easy to install post conversion kit is available. With this simple post extension you can provide an exciting new look for your existing LYSAGHT NEETASCREEN® fence. Please see page 24 in the download: LYSAGHT® Non-Cyclonic Fencing Installation Guide PDF (2.34 MB). Last updated 9 Apr 2019

LYSAGHT INTERLOK® II is suitable for use on sloped walkways and ramps constructed in accordance with AS 1657.Ramps up to 7° slope may be decked with INTERLOK® II Regular.INTERLOK® II Anti-skid may be used where cleated ramps are normally required, ie up to 20° slope. However, to ensure adequate grip across full width of such ramps, the grating must be laid transverse to the direction of travel.

LYSAGHT INTERLOK® II is suitable for use on sloped walkways and ramps constructed in accordance with AS 1657.Ramps up to 7° slope may be decked with INTERLOK® II Regular.INTERLOK® II Anti-skid may be used where cleated ramps are normally required, ie up to 20° slope. However, to ensure adequate grip across full width of such ramps, the grating must be laid transverse to the direction of travel.

It is necessary for every rib of LYSAGHT TRIMDEK® to be screw fastened to the support.

It is not recommended to unclip LYSAGHT KLIP-LOK® 406 once the cladding is installed. Unclipping can damage the clips, cladding or metallic coating on the cladding. It is difficult to assess how LYSAGHT KLIP-LOK® 406 will perform after such damage.